Although there are many bench grinders and other sharpening machines on the market, few are intended for wet sharpening. Only wet sharpening machines offer the guarantee that the steel cutting edge will not be overheated in the process and thus have its usefulness reduced. And only Tormek of Sweden has managed to develop a fully rounded system for hand tool users that will meet virtually every sharpening need.
The Tormek T-7 is intended for professional craftsmen and the demanding hobbyist. It comes in a sturdy 3 mm sheet metal housing, has a carrying handle and a heavy-duty 200 W industrial motor. The main shaft is now made of stainless steel.
The Tormek T-3 is intended for the amateur working at home. Its motor is set to run for no more than 30 minutes per hour, and the housing is plastic. With the T-3 you get access to the Tormek high-quality sharpening system at a favourable price and it is ideal for sharpening woodworking hand tools, knives and scissors.
When using your Tormek grinding wheel, make sure:
to empty the water container when the machine is not in use. Otherwise, one side of the stone will absorb water and it will be out of true as it rotates. The wobble can eventually lead to damage to the bearing
The Tormek grinders we sell are intended for the German market. If you want to use them outside Germany read this note on using Tormek grinders outside Germany.
- 1
- 2
- 3
- 4
- 5
- 6
Tormek T-8 Original wet bench grinder
With fully cast housing, zinc cast top and frame. Sides in ABS plastic. Stainless steel main shaft, stone hardware and EzyLock.
Aluminium oxide grinding wheel 250 x 50 mm
Genuin leather honing wheel 220 x 31 mm
Maintenance free motor 230 V, 200 W (input), fully enclosed
Continuous duty
Low-noise operation, 54 dB
25000 hour life
Torque on stone 14.7 Nm
Running speed 90 rpm (idling)
Dimensions: H 330 mm, B 270 mm, T 270 mm
Weight 18.7 kg
Included with the machine:
SG 250 Super Grind stone
SE-77 square edge jig
TT-50 truing and dressing tool
SP-650 stone grader
WM-200 angle master
PA-70 honing compound
Tormek manual in German only!
AWT-250 water container
LA-220 leather honing wheel
EM-15 blade marker
This item we ship only within the European Union!
Code 301400Price ∗ € 778.90
Improvements over the Tormek T-7
The Tormek grinders we sell are intended for the German market. If you want to use them outside Germany read this note on using Tormek grinders outside Germany.
Japanese water stone wheels for large Tormek grinders
Japanese Sun Tiger water stone wheel 800 grit for large grinders
Improve your Tormek with these premier Japanese water stone wheels, made by Matsunaga (brands: King and Sun Tiger). The 800 grit grade is ideal for general sharpening and even for grinding down notches.
Suitable for all Tormek grinders nos. 2000 to 2006, T7, T8, also suitable for Scheppach und Jet.
Note: Max. running speed 600 rpm!
Diameter 253 to 257 mm
Thickness 45 to 47 mm
Diameter of hole 12 mm
Promotion Price
instead of* €179,90
Code 313620Price ∗ € 161.91
Japanese Sun Tiger water stone wheel 4000 grit for large grinders
Improve your Tormek with these premier Japanese water stone wheels, made by Matsunaga (brands: King and Sun Tiger). With the 4000 grit grade wheel you achieve a mirror-polished edge. Specially recommended for those who sharpen a lot of knives and want a perfectly sharp edge without using a leather strip.
Suitable for all Tormek grinders nos. 2000 to 2006, T7, T8, also suitable for Scheppach and Jet.
Note: Max. running speed 600 rpm!
Diameter 253 to 257 mm
Thickness 45 to 47 mm
Diameter of hole 12 mm
Promotion Price
instead of* €249,90
Code 313621Price ∗ € 224.91
- 1
- 2
- 3
Tormek T-4 wet grinding wheel
The Tormek T-4 is an enhancement of the T-3 model taking precision and stability to a completely new level. Vital functions like the motor and the main shaft are mounted in the zinc cast top which includes the integrated sleeves for the universal support (for vertical and horizontal use). This advanced design ensures an unbeatable precision for the universal support, which is the foundation of the Tormek jig system.
You get a high-quality machine ideal for home and hobby work which can sharpen all the common edge tools. Delivered with the stone grader SP-650, angle master WM-200, honing compound, DVD and the comprehensive Tormek handbook on sharpening. Configure the T-4 with your choice of jigs according to the tools that you will be sharpening. The jigs are sold separately.
Note:Does not include the SE-77 square edge jig!
ABS plastic housing
Top made of cast zinc
Stainless steel main shaft
SG 200 Super Grind stone 200 x 40 mm
Genuine leather honing wheel 145 x 26 mm
Motor 230 V, 120 W (input)
Duty max. 30 min (hour)
Running speed 120 rpm (idling)
Dimensions: H 260 mm, B 230 mm, T 200 mm
Weight 8 kg
7 year warranty! (applies to private use only!)
Included with the machine:
SSG 200 super grindstone
WM-200 angle master
PA-70 honing compound
SP-650 stone grader
HB-10 Tormek manual in German language only!
Note: we are not able to supply the manual in other languages!
Short "Getting started" instructions in following languages:
EN, SE, DE, FR, ES, FI, IT, NL, RU
WB-200 water container
LA-145 leather honing wheel
This item we ship only within the European Union!
Code 301302Price ∗ € 439.00
The Tormek grinders we sell are intended for the German market. If you want to use them outside Germany read this note on using Tormek grinders outside Germany.
Japanese water stone wheels for small Tormek grinders
Japanese Sun Tiger water stone wheel 800 grit for small grinders
Improve your Tormek with these premier Japanese water stone wheels, made by Matsunaga (brands: King and Sun Tiger). The 800 grit grade is ideal for general sharpening and even for grinding down notches.
Suitable for all Tormek grinders nos. 1200 to 1206, T3 and T4.
Note: Max. running speed 600 rpm!
Diameter 205 mm
Thickness 40 mm
Diameter of hole 12 mm
Promotion Price
instead of* €99,90
Code 313624Price ∗ € 89.91
What to do when a grinding wheel is too large?
Japanese Sun Tiger water stone wheel 4000 grit for small grinders
Improve your Tormek with these premier Japanese water stone wheels, made by Matsunaga (brands: King and Sun Tiger). With the 4000 grit grade wheel you achieve a mirror-polished edge. Specially recommended for those who sharpen a lot of knives and want a perfectly sharp edge without using a leather strip.
Suitable for all Tormek grinders nos. 1200 to 1206, T3 and T4.
Note: Max. running speed 600 rpm!
Diameter 205 mm
Thickness 40 mm
Diameter of hole 12 mm
Promotion Price
instead of* €139,90
Code 313625Price ∗ € 125.91
Tormek jig solutions
These fit all Tormek machines with type numbers from 1200 to 1206, 2000 to 2006, and T-3 to T-8. Before ordering jigs here, check what is already included with the machine.
Knife Angle Setter KS-123 TORMEK
While the WM-200 angle gauge is primarily designed for tools with a single bevel, Tormek has now created a simple and accurate way to set the grinding angle for knives with tapered blades in three easy steps. The patented gauge is compatible with all Tormek knife jigs and fits all Tormek machines with a universal support. It adjusts itself to the diameter of the grinding disc. The settings for the correct square are based on exact geometric considerations, so that the result is always correct with the help of this analogue setting aid.
Please click here on "Allow Cookies" to watch the video.
Code 301505Price ∗ € 42.90
Multi Base MB-102 TORMEK
The MB-102 Multi Base can be adjusted in a variety of ways to enable optimum positioning for every tool and every fixture.
For example, the horizontal holder can be converted into a vertical one. This facilitates handling when sharpening with the rotation of the disc and for guided honing with knife devices or makes this work possible in the first place.
The universal Multi Base MB-102, which now has two additional openings for holding the universal support compared to the previous model, also enables sharpening on the side of Tormek diamond grinding discs.
Please click here on "Allow Cookies" to watch the video.
Code 301406Price ∗ € 89.90
KJ-45 knife jig
For most knives. Width 45 mm (1 3/4 inch). Long knives need to be stiff. Min. blade length 60 mm (2 3/8 inch). The jig rests freely on the universal support so you can follow the curve of the blade.
Also for straight drawknives
Instructions for use (PDF)
Video
Promotion Price
instead of* €53,90
Code 301312Price ∗ € 48.51
SVM-00 small knife holder
The new SVM-00 small knife holder from Tormek can handle those really small knife blades which up until now have been difficult to sharpen. Normally they have been sharpened free-hand but every time it was a challenge to get a consistent shape and almost impossible to control the edge angle.
You can now sharpen knives of different shapes for whittling, chip carving and detail work. Even folding pocket knives can be sharpened with perfect control. Since it is the handle of the knife that is mounted in the SVM-00 holder, there is really no limit to how small a blade you can sharpen.
Note: The SVM-00 works only in conjunction with the SVM-45 knife jig. Knife in picture NOT included!
VideoPromotion Price
instead of* €41,90
Code 301393Price ∗ € 37.71
KJ-140 long knife jig
This new knife jig is developed especially for long and flexible knives, eg, filleting knives. Its larger width, 140 mm (5 1/2 inch), stabilizes a long and thin blade and the jig copes with blades longer than 160 mm (6 1/4 inch).
VideoPromotion Price
instead of* €65,90
Code 301313Price ∗ € 59.31
SVX-150 scissors jig
For scissors and shears. The scissors are mounted in a holder, which slides freely on a support plate so that you can follow the individual convex shape of the scissors. Also for portable electric hand planer blades. The SVX-150 jig comprises a support plate and a holder with two clamps for the scissors. Usually you use only the right clamp. For large scissors and garden shears you use both clamps.
VideoPromotion Price
instead of* €63,90
Code 301314Price ∗ € 57.51
SVA-170 axe jig
For carving and carpenter’s axes. The head of the axe slides freely on the rubber lined stop so you can follow the shape of an individual edge, straight or curved. The jig comprises a clamp with a rubber lined, wedge-shaped stop, which holds the axe in a fixed position towards the grindstone. The clamp works on the universal support, on which it slides across the stone. The jig is designed so that the rotation of the stone presses the axe firmly into the jig. You only need to hold and guide the axe with your hands. This jig only works with the stone running towards the edge. If necessary, the honing wheel can be removed to allow clearance for the axe handle.
VideoCode 301318Price ∗ € 17.90
SVS-38 short tool jig
For straight-shanked tools, such as wood chisels, carving gouges and tools for power carvers. Flanges ensure a 90° positioning of the tools towards the grindstone. Copes with tools down to 45 mm (1 3/4 inch) length and max. width 38 mm (1 1/2).
This patented jig was developed for short woodcarving tools, butt chisels and tools for power carvers. The jig has two parallel flanges running on both sides of the universal support.
The technique achieved with this design ensures that at all times the jig – even when rotated – holds the tool square to the grindstone. This is a great advantage, as you can concentrate fully on how the edge touches the grindstone or the honing wheel without having to worry whether the jig is square to the stone.
Example with V-tool
Example with power carver
Promotion Price
instead of* €27,90
Code 301324Price ∗ € 25.11
SVD-186 R gouge jig
For an exact replication of the shape on fingernail shaped turning gouges. Can be set for various lengths of the side bevel. Plus shaft for turning cutters. Also for bent carving gouges and V-tools. Max tool width 36 mm.
Example with hollow gouge
Example with exchangeable blades
Promotion Price
instead of* €110,90
Code 301317Price ∗ € 99.81
SVS-50 multi jig
For an exact replication of the shape on skew turning chisels with a straight or curved edge. Thanks to a unique design the jig also copes with oval section skews. Also for parting and beading tools and roughing gouges. Straight carving gouges up to 50 mm (2 inch) wide. Max width of skews 32 mm (1 1/4 inch). (Important for owners of an old Tormek: for this accessory to work you need the XB 100 horizontal grip for the universal support!)
Sharpening a large gouge
Sharpening a large gouge
Sharpening a parting tool
Construction
Expected to be available from week46/2024
Code 301316Price ∗ € 57.90
SVD-110 tool rest
This tool rest is ideal for the grinding of turning scrapers and special tools for woodcarving, eg, large scorps and inshaves. Also for cabinet scrapers and hollowing tools.
It has a generous surface, 90 x 110 mm (3 1/2 x 4 1/2 inch), which permits a safe and steady positioning of the tool towards the stone. The bore is made with a special wedge shape that increases the locking force by 250%. You can lock the tool rest instantly at the chosen angle. This unique design is patented by Tormek.
Flattening the edge of cabinet scrapers
VideoPromotion Price
instead of* €39,90
Code 301315Price ∗ € 35.91
SE-77 square edge jig
With the SE-77 square edge jig it is easy to set your wood chisels and plane irons for sharpening to a square corner. The design gives you the best conditions for a successful sharpening with the highest precision over the final result. You can also set the jig for a slightly convex shape.
The SE-77 square edge jig is a further development of the SE-76 jig. It has been provided with an adjustable side that can be set with the help of two smaller knobs, which allows fine tuning if needed. This can be required if the tool is not exactly square to the stone, is very narrow, or if the steel is slightly twisted. The setting for fine adjustment is done in seconds by loosening one of the smaller adjustment knobs and tightening the other.
The jig's construction also makes it possible to position and sharpen tapered chisels, eg, Japanese chisels. The safety stops keep the jig securely on the universal support and prevent the tool from sliding off the grindstone, so there is no risk of injury to your fingers when sharpening. The jig fits wood chisels and plane irons up to 77 mm (3") width and 9 mm thickness.
Promotion Price
instead of* €72,90
Code 301379Price ∗ € 65.61
SVH-320 planer blade attachment
For blades of any length. Blades longer than 270 mm (10 1/2 inch) are relocated in the blade holder and ground in two steps. The grinding depth can be set within 0.1 mm (0.004 inch). Min width of blade 13 mm (1/2 inch). Read the instruction leaflet carefully before using the attachment!
VideoPromotion Price
instead of* €222,90
Code 301322Price ∗ € 200.61
SVP-80 moulding knife attachment
Spezialschleifvorrichtung für das Schleifen von Profilfräsermessern. Bei dieser Vorrichtung wird die Spiegelseite der Messer gechliffen.
Profilfräser, die mit dieser Vorrichtung geschliffen werden können
Farbkratzer, der mit dieser Vorrichtung geschliffen werden kann
Befolgen Sie die beiliegende ausführliche Gebrauchsanweisung genau!
VideoCurrently not in stock
Code 301308Price ∗ € 171.90
DBS-22 drill bit sharpening attachment
With the Tormek patented DBS-22 attachment for drill bits you can now sharpen your drill bits to the highest precision. The optimal point and clearance angles can be set according to each drilling requirement, which depends on the drill size and material. You can completely restore worn drills as well as broken drills to a perfect shape.
More ... (PDF)
Read the instruction leaflet carefully before using the attachment!
VideoPromotion Price
instead of* €290,90
Code 301327Price ∗ € 261.81
DC-250 Tormek 360 grit grade diamond wheel for Tormek T8
Thanks to the constant diameter of the wheel, it offers the ability to sharpen on the side as well as the periphery. Side sharpening is perfect for small carving tools such as carving gouges and V-tools plus plane irons, wood chisels and knives. The result is a bevel edge with a completely flat instead of a hollow surface.
Always use the anti-corrosion concentrate (included) in the water when sharpening with water. Use water when sharpening with the diamond wheel as it prolongs the life of the wheel.
Coarse
Diameter 250 mm
Promotion Price
instead of* €349,90
Code 301401Price ∗ € 314.91
DC-200 Diamond grinding wheel for Tormek T4/T3/1200
Coarse
Diameter 200 mm
Code 301501Price ∗ € 207.90
DF-250 Tormek 600 grit grade diamond wheel for Tormek T8
Thanks to the constant diameter of the wheel, it offers the ability to sharpen on the side as well as the periphery. Side sharpening is perfect for small carving tools such as carving gouges and V-tools plus plane irons, wood chisels and knives. The result is a bevel edge with a completely flat instead of a hollow surface.
Always use the anti-corrosion concentrate (included) in the water when sharpening with water. Use water when sharpening with the diamond wheel as it prolongs the life of the wheel.
Fine
Diameter 250 mm
Promotion Price
instead of* €334,90
Code 301402Price ∗ € 301.41
DF-200 Diamond grinding wheel for Tormek T4/T3/1200
Fine
Diameter 200 mm
Code 301502Price ∗ € 209.90
DE-250 Tormek 1200 grit grade diamond wheel for Tormek T8
Thanks to the constant diameter of the wheel, it offers the ability to sharpen on the side as well as the periphery. Side sharpening is perfect for small carving tools such as carving gouges and V-tools plus plane irons, wood chisels and knives. The result is a bevel edge with a completely flat instead of a hollow surface.
Always use the anti-corrosion concentrate (included) in the water when sharpening with water. Use water when sharpening with the diamond wheel as it prolongs the life of the wheel.
Extra fine
Diameter 250 mm
Promotion Price
instead of* €334,90
Code 301403Price ∗ € 301.41
DE-200 Diamond grinding wheel for Tormek T4/T3/1200
Extra fine
Diameter 200 mm
Code 301503Price ∗ € 216.90
Tormek accessories
These fit all Tormek machines with type numbers from 1200 to 1206, 2000 to 2006, and T-3 to T-7. Before ordering jigs here, check what is already included with the machine.
Scope of delivery:
2 bottles, 150 mm capacity each, with scale for easy measuring, sufficient for a total of 7.5 litres.
ACC-150 Anti-Corrosion Concentrate TORMEK
Although the Tormek diamond grinding discs can also be used "dry", we clearly recommend sharpening with water to extend the service life.
However, the use of water is also associated with corrosion on the disc itself or the build-up of metal particles removed from the tool being worked on, which can be counteracted by adding the rust protection concentrate.
As the concentrate has no negative effects on conventional grinding discs, the water does not need to be replaced when changing the disc.
Economical to use, a 4% dilution is sufficient, corresponding to 10 ml concentrate to 250 ml water.
Code 301504Price ∗ € 35.00
RB-180 rotating base
Rotate your Tormek!
Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from the edge. With the new Tormek RB-180 rotating base you can easily rotate the machine 180° to select the ideal sharpening direction. It also makes it simple to switch from sharpening to honing!
A priority during the design process has been to make the RB-180 as thin as possible in order not to affect the working height. The rubber feet ensure it remains steady during sharpening. The RB-180 will fit the Tormek T-8, T-7 and T-4, the 2000 and 1200 series plus the SA-250, T-3 and N-1500.
VideoPromotion Price
instead of* €63,90
Code 301344Price ∗ € 57.51
TT-50 truing tool
Trues the grindstone exactly round and flat. Guided by the universal support which also guides the jigs. Screw feed with dual knobs for smooth feed across the stone. The cutting depth can be set within 0.25 mm (0.01 inch).
You can conveniently and without pressing with your thumbs feed the diamond cutter across the stone. You achieve an even feeding by alternately turning the two knobs with both hands. The feed can be made in both directions. Thanks to the controlled feed, you get an even and flat stone surface with no ridges. There is no need to flatten afterwards with the SP-650 stone grader. The slower you feed, the finer the surface you will achieve. A traverse time of 90 seconds across the stone gives you a good finish with hardly any visible grooves.
The cutting depth is set exactly by the micro adjust on the universal support. New universal supports will have a scale with increments of both 0.25 mm or 0.01 inch You can also use your existing micro adjust that has no scale. A cutting depth of 0.25 mm or 0.01 inch corresponds to a sixth of a full turn.
With a higher feed speed across the stone (approx. 30 instead of 90 seconds) the surface will have pronounced grooves, which will cause the stone to grind faster. This is beneficial when sharpening or shaping tools in hard steel with a large bevel area, eg, skew turning chisels and electric jointer/planer blades.
The mounting and use of this latest Tormek innovation is very easy and straightforward as you can see in the instructions included with the tool.
VideoPromotion Price
instead of* €97,90
Code 301319Price ∗ € 88.11
Replacement diamond cutting tip
Suitable also for the older ADV-50D
Code 301325Price ∗ € 51.90
SP-650 stone grader
For changing the properties of the grindstone. The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone.
The Tormek grindstone is constructed so that with the stone grader it can be treated to change its property from fast grinding to fine grinding, ie, sharpening. This has obvious advantages. You can make both the first fast grinding and the sharpening on the same grindstone and the same grinding machine and with the same setting of the jig. Besides being a very fast method, this achieves a perfect edge as the fine grinding is done in exactly the same position as the first fast grinding.
The grading of the grindstone is made by pressing the fine side of the stone grader onto the grindstone, which makes it work as a fine grit stone (approx. 1000 grit). When pressing the coarse side onto the grindstone, the smoothened surface is returned to its normal condition (220 grit). This process does not produce excessive wear of the grindstone and can be repeated any number of times.
VideoCode 301310Price ∗ € 29.90
LA-120 Profiled Leather Honing Wheel TORMEK
Will be translated soon!
mit auswechselbaren Lederscheiben. Zum Abziehen und Polieren der Innenseite von Drehröhren, Hohleisen und Geissfüssen.
Diese Abziehscheibe hat zwei auswechselbare Lederprofile, damit Sie eine abgenutzte Scheibe problemlos durch eine neue ersetzen können.
Die beiden mitgelieferten Standardprofile haben einen Radius von 3 mm und eine Spitze mit einem Winkel von 60°.
VideoPromotion Price
instead of* €64,90
Code 301306Price ∗ € 58.41
Als Zubehör gibt es einen Satz mit schmaleren Profilen mit 2 mm Radius und einem Winkel von 45°. Diese feineren Profile sind besonders für das Abziehen von kleinen Schnitzwerkzeugen gut geeignet. Der Durchmesser der grösseren Scheibe ist von 100 auf 120 mm erhöht worden, was einen höheren Abzieheffekt ergibt.
Im Vergleich zur bisherigen LA-100, hat diese neue Lederabziehscheibe einen grösseren und tieferen Abstand zwischen den beiden Profilen. Dies gestattet auch das Abziehen von Werkzeugen mit breiteren und tieferen Profilen.
Die LA-120 Scheibe kann vor der befindlichen LA-100 Scheibe (oder die LA-100 vor der LA-120) montiert werden. Sie können dann beide Scheiben gleichzeitig benutzen. Sie können auch zwei LA-120 Scheiben montieren und haben nach Kauf des LA-124 Satzes, zu allen vier Profilen gleichzeitig Zugang.
Extra LA-124 set of replacement discs
Radius 2 mm and tip 45°
for LA-120
Code 301367Price ∗ € 36.90
WM-200 angle master
Sets and measures the edge angle. Adjustable to any stone diameter from Ø 250 mm or 10 inches down to Ø 150 mm or 6 inches. Measures from 10° to 75°. Magnets keeps it in place.
VideoCode 301329Price ∗ € 29.90
TTS-100 turning tool setter
For instant replication of the geometries on turning gouges and skews when using the SVD-185 gouge jig and SVS-50 multi jig. With built-in edge geometries. Works on any stone diameter. Comes with detailed user instructions.
VideoCode 301321Price ∗ € 29.90
PA-70 honing compound
For applying to the leather honing wheels. Grit size 3 µm (average). Removes the burr and polishes the edge to a mirror finish. One application lasts for 5 to 10 tools. Then reimpregnate the honing wheel with a few drops of oil and apply fresh honing compound. Work the honing compound into the leather. Do not let the compound dry, apply more oil if necessary.
Safety data sheet (PDF)
Promotion Price
instead of* €12,90
Code 301305Price ∗ € 11.61
MH-380 machine cover
For protecting the machine from shavings and wood dust.
Suitable only for the large Tormek grinding wheels 2000 to 2006, and T-7.
Code 301311Price ∗ € 23.90
Accessory kits
TNT-808 woodturner’s kit
This kit contains everything you need to shape and sharpen all your turning tools.
Contents:
SVD-186 R, SVD-110, LA-120, TTS-100
SVS-50, MH-380, TNT-300, TC-800 + TNT-00
Promotion Price
instead of* €385,90
Code 301381Price ∗ € 347.31
HTK-806 hand tool kit
This kit contains the jigs for sharpening your knives, including small knives, scissors, draw knives and axes as well as short chisels and carving tools.
Content:
KJ-45, KJ-140, SVM-00, SVX150, SVA-170, SVS-38, TC-800 + HTK-00
Promotion Price
instead of* €261,90
Code 301383Price ∗ € 235.71
Tormek mounting set for bench grinder
Tormek mounting set for BGM-100 bench grinder
This set enables you to use the Tormek woodturning jigs on a bench grinder. It includes the Tormek universal support with micro adjust and a mounting base together with a detailed handbook on how to shape and sharpen woodturning tools. The instruction includes drawings for making the wooden platform to fit the grinder. It also includes profile labels for your bowls and spindle gouges to allow you to replicate the same shape when used with the Tormek TTS-100 setter.
Code 301390Price ∗ € 89.90